View Neutra Reverb user manual, PDF
Latency and bypass
Read processing delay and apply pending processing changes.
Document revision 3 · Updated 17 November 2026
For product version 1.0.5
The header shows the current latency in samples, followed by smp. The plug-in reports this delay to the host for compensation.
Reverse holds the sound back by the tail's length so the backwards tail ends at the source.
In Pitch detection settings, Lookahead (Off, 10, 25, 50, or 100 ms) adds its chosen time to the reported latency.
EQ phase and resolution
Right-click a point and open Filter for Phase. Post EQ, Width, Early/Late, Input, Pre-Delay, and Modulation offer Zero Latency, Natural Phase, Linear Phase, and Hybrid Phase. For all-pass audio shapes in Pre-Delay or Modulation, choose Zero Latency, Natural Phase, or Linear Phase.
Zero Latency uses conventional filters. Natural Phase adds a short alignment delay. Linear Phase delays frequencies equally; Hybrid Phase combines minimum-phase lows with a linear high end.
Resolution appears with Linear Phase or Hybrid Phase. Higher resolution uses longer filters and adds delay. Choose Maximum (offline) for offline Linear Phase rendering and a live setting for playback.
Apply pending changes
Changes to type, Impulse mode, Reverse Time, EQ Phase, Resolution, or Lookahead can require the host to reactivate processing. While Waiting for host restart appears, you hear the previous setup. The requested settings take effect when the host reactivates the plug-in; Undo restores the previous choice.
Use the header's power control to bypass processing and hear the dry signal.
Page updated 2026-11-17