View Neutra Compressor user manual, PDF
Multiband
Split the signal into bands and compress each one.
Document revision 3 · Updated 5 November 2026
For product version 1.0.0

Bands and crossovers
Choose Multiband in the toolbar to edit bands over the live spectrum.
Double-click the spectrum to split a band at that frequency. The new band copies the split band’s settings. Double-click a crossover to merge its adjacent bands into the lower band. Drag a crossover to move it, or edit its frequency field. Select a band and press Delete, or use its X, to remove it. Right-click a crossover to choose its slope. Linear phase offers 6 to 96 dB/oct and Brickwall. Minimum and Dynamic phase offer 12, 24, 48, 72 and 96 dB/oct with Linkwitz-Riley, or 6 to 48 dB/oct in 6 dB steps with Butterworth.
Each band has M and S buttons to mute or solo it. Select a band to edit it. Turn on Curve in the toolbar to show its transfer curve; see Transfer curve.
Band controls
The yellow line sets the band’s threshold and the blue Gain Out line sets its output level. Drag either line. The Band row edits the selected band’s Style, Ratio, Knee, Attack, Release, Down, Up, Expand, Gain In, Auto gain, Hold and Options. Style can follow Main or use a band-specific style.
Options selects Compress down, Compress up, Expand down or Expand up. All four use the band’s Threshold and Ratio: Compress down reduces levels above Threshold, Compress up lifts levels below it, Expand down reduces levels below it, and Expand up lifts levels above it. Draw uses the drawn transfer curve directly. Down, Up and Expand shape the default Compress down response. Hold, Knee shape and Peak follow their shared settings until overridden for a band. See Multiband parameters for ranges and defaults.
Band options
Options holds the band’s Sidechain and Link controls. Saturation sets the drive of a soft saturator after band compression. Use it to round the band’s peaks. Saturation mix blends the compressed band before and after saturation, from 0% unshaped to 100% saturated.
Shared controls

With All selected, the row holds controls shared by every band. Amount blends the static split signal with the dynamically processed bands, from 0 to 100%. Time scale multiplies adjustable band attack and release times from 0.1x to 10x. Lookahead advances detector timing. Peak switches Clean bands from RMS to peak detection unless a band overrides it. Auto gain follows Compression.
Phase
Minimum phase splits at the frequencies you set, with frequency-dependent phase shifts around the crossovers. Linear phase gives the crossover paths a common delay across frequencies. It runs up to 32 bands and adds 3,072 samples of delay. Dynamic phase moves the crossovers around your chosen frequencies in response to the input’s spectral balance, changing how the audio is divided between bands. It runs up to 8 bands.
Above either mode’s band limit, processing uses Minimum phase. Topology selects Linkwitz-Riley or Butterworth for Minimum and Dynamic phase. See Latency and bypass.
Page updated 2026-10-29