View Neutra Compressor user manual, PDF

Neutra Compressor

Compression

Threshold, ratio, knee, timing, gain and character.

Document revision 3 · Updated 5 November 2026

For product version 1.0.0

Threshold, ratio and knee

Threshold sets the level where compression begins. With Auto threshold on, the effective threshold follows programme level at 12 dB below it, capped by the Threshold setting. Auto threshold also sets the base detector’s Attack to at least 18 ms. Style voicing and linked Character Drive can shift the effective threshold.

Ratio controls how strongly levels above Threshold are reduced. Knee sets the width of the transition into compression, and Knee shape selects its curve. Range caps gain reduction. Style voicing can constrain Knee and Range.

Timing

Attack sets how quickly gain reduction builds as the signal rises. A shorter Attack catches transients sooner; a longer Attack lets more of their onset through. Release sets how quickly gain reduction recovers as the signal falls. Shorter Release restores level sooner; longer Release makes recovery more gradual. Auto release selects recovery from the programme level in styles with an Auto release switch. In Clean and Upward, Auto release also holds Attack at 18 ms or longer. Diode Bridge uses its release dial to choose the Auto release range. Vari-Mu uses its Recovery selector; Fairchild pairs Attack and Release in one selector.

Hold delays release. Lookahead delays the programme so the detector can anticipate transients. See Latency and bypass.

Down, Up and Expand

With Draw off, Down controls downward compression from 0 to 100%; 100% applies the full curve. Up lifts signal below the effective Threshold. The Expand amount reduces signal more than 24 dB below the effective Threshold. Up and Expand each span 0 to 100% and start at 0%.

Gain and Auto gain

Gain In changes the level feeding compression. Auto gain adjusts output level to offset compression.

Character and oversampling

Character adds Tube, Diode or Bright saturation, or Off. In Single mode, choose Character in the controls row. In Multiband, choose it in Settings > Processing. With Character active, Drive appears in Processing; Character position and Character moves threshold appear there in Single mode. Character position selects Pre or Post compression. When Character moves threshold is on, increasing Drive lowers Threshold.

Oversampling in the toolbar processes saturation at a multiple of the sample rate to reduce aliasing. Active oversampling adds 31 samples of delay.

See Parameters for ranges and defaults.

Page updated 2026-10-29