View Neutra EQ user manual, PDF

Neutra EQ

Analyzer and tools

Read the spectrum and build EQ curves from it.

Document revision 1 · Updated 23 October 2026

For product version 1.0.0

Analyzer

Choose Pre, Post, Pre+Post, or Diff, or choose Off to hide the spectrum. Pre shows the input and Post shows the output. Diff shows Post minus Pre on the graph's gain scale. The analyzer defaults to Pre+Post at 2048 samples. The analyzer runs from 20 Hz to 20 kHz and from -90 dB to 0 dB. Set its FFT size in Settings.

Tools

Open Tools for three ways to create bands.

Sketch

Select Draw curve, then drag left to right across the graph. Neutra EQ fits up to eight bands to your curve.

Match

Match moves a source toward a reference.

  1. Set Analyzer to Pre, Post, Pre+Post, or Diff. Under Reference, select Capture while the reference audio plays through Neutra EQ, then Stop.
  2. Under Source, do the same with the audio you want to change.
  3. Set Amount from 0% to 100%.
  4. Select Match to add up to eight bands. Clear removes both captures.

You can also load a WAV file as the reference with Choose file.

Spectrum Grab

Play audio so the analyzer collects a spectrum, then turn on Spectrum grab. The display freezes and handles appear at up to six peaks. Drag a handle down to cut that peak, or up to boost it. Turn Spectrum grab off to resume the analyzer.

Page updated 2026-10-21