View Neutra Reverb user manual, PDF

Neutra Reverb

Frequency curves

Shape decay, tone, width, balance, delay, and movement across frequency.

Document revision 3 · Updated 17 November 2026

For product version 1.0.5

In Advanced, select EQ, then a frequency tab above the graph.

A Decay point set to 104%, with the response spanning the full frequency axis.
GraphWhat the vertical value changes
DecayDecay rate as a percentage: 100% is normal, 200% falls twice as fast, and 50% falls half as fast.
Post EQGain of the wet signal in dB.
WidthPercentage of the overall Width setting; 100% keeps that setting.
Early/LateBalance in dB; positive values favour early reflections.
InputFiltering before the reverb, in dB.
Pre-DelayExtra delay in milliseconds, added to Pre-Delay.
ModulationExtra movement as a percentage of Depth in the Mod tab.

Pre-Delay and Modulation curves are read at six frequency bands, shown by dots.

For Decay and Early/Late, use the algorithmic reverb setup.

Each frequency graph holds up to eight points. Input also counts the filters controlled from Output. Input filtering covers that graph. Curve editing explains the shared gestures.

Spectrum controls

Use Analyzer above the graph to choose the spectrum view. Freeze beside it holds the displayed spectrum. The numbered FFT-size menu sets frequency detail: larger sizes separate nearby frequencies; smaller sizes follow changes sooner.

Choose Post or Pre+Post, enable Spectrum Grab, and drag a highlighted peak. This edits a nearby band or creates one. Horizontal movement sets frequency; vertical movement sets the graph value. Press Escape to return to ordinary graph editing.

For Phase, Resolution, and pending processing changes, see Latency and bypass.

Page updated 2026-11-16