View Neutra EQ user manual, PDF

Neutra EQ

Interface

Find each control in the numbered interface diagram.

Document revision 1 · Updated 23 October 2026

For product version 1.0.0

Neutra EQ interface, with numbered callouts for the header, toolbar, graph, band panel, output, and Settings.

1. Header

The header holds the preset bar with Initialize (the page icon) and Save (the disk icon), Gain In and Gain Out, the latency in samples, Settings, and Bypass. Gain In and Gain Out set the level entering and leaving the EQ. See Presets.

2. Toolbar

The toolbar row below the header holds A, B, Copy, Undo, Redo, the route chips, Analyzer, the phase menus, and Tools. The Stereo, Left, Right, Mid, and Side chips match the curve colors, and the selected chip sets the route for new bands. The phase menu, to the right of Analyzer, holds the processing mode, and a second menu sets the resolution. See Processing modes.

3. Graph

The graph shows a response curve for each channel route in use, combining the bands on that route, from 20 Hz to 20 kHz. Bands appear as nodes you can drag. The analyzer spectrum draws behind the curve. Piano, at the lower left, shows a keyboard strip for placing bands by note. See Analyzer and tools.

Above the meters, choose the graph's vertical range: Auto, or a fixed range from plus or minus 3 dB to plus or minus 120 dB.

4. Band panel

The band panel has a shape menu at the top. Under it, Filter holds frequency, gain, Q, slope, Combine, and routing, and Dynamic / Pitch holds the dynamic and pitch controls. See Bands and filters and Dynamic EQ and pitch.

Enlarged Filter panel from the diagram, showing a bell at 1000 Hz, -6 dB Gain, and Q 1.20, with routing and band actions below.

5. Out and meters

See Output for the output controls. The meters below Out show left and right peak levels from -60 dB to +12 dB.

6. Settings

The gear button opens Settings. It holds these options:

  • Analyzer size: the FFT size, from 1024 to 131072 samples.
  • Add bands: Single click or Double click on the graph.
  • Gain range: the range for new edits to band gain, dynamic range, and Gain Out, from 1 to 120 dB. The default is 40 dB, and gains you set earlier keep their values.
  • Size: the interface scale from 75% to 300%.
  • Arrow keys step presets: see Presets.
  • Show modulation: see Modulation.

Settings are saved as you change them.

Page updated 2026-10-21