View Neutra Limiter user manual, PDF
Metering and channels
The Meters drawer, loudness readings, K-System scales, surround layouts, and channel linking.
Document revision 1 · Updated 23 October 2026
For product version 1.0.0
Level meters
The Meters drawer shows IN, OUT, and GR bars with held readouts. The IN and OUT bars run from +3 to -48 dB, and GR runs from 0 to 24 dB of reduction. A held readout keeps a peak for 1.2 seconds, then falls toward the live value at 24 dB per second.

Loudness
The loudness module follows ITU-R BS.1770-4 and EBU R128. Momentary reads over 400 ms, Short-term over 3 seconds, and Integrated is the gated average of the program. True peak shows the output's recent true peak in dBTP and holds it like the level readouts.
Integrated accumulates processed audio from the last processor reset. Host reset or plug-in reactivation starts a fresh measurement, including reactivation for latency changes. Repeated playback contributes to the accumulated reading until that reset.
The K-System selector switches between absolute loudness in LUFS and a scale relative to its reference level, where a program at the reference reads 0. The True peak row stays in dBTP. See Parameters for the available scales.
Channel layouts
Neutra Limiter supports six layouts, up to 16 channels: Mono, Stereo, 5.1, 7.1, 7.1.4, and 9.1.6. Choose the layout in your host's channel or audio-port configuration. The Settings panel shows the current layout and latency.
From 5.1 upward the fourth channel is the LFE. With Limit LFE off, it follows the same delay, uses unity input and output gain, and has a 0 dBFS sample ceiling. Switch on Limit LFE in Settings under Surround to apply Input Gain, the limiter, and Output Gain to it as well. Loudness measures the main channels. In 5.1, the surround pair uses a weight of 1.41, and other measured channels use a weight of 1.
Channel linking
Ch. Link Transient blends each channel's peak reduction toward the largest reduction across channels, from 0% to 100%. Ch. Link Release applies the same blend to recovery.
Page updated 2026-10-21