View Neutra Compressor user manual, PDF

Neutra Compressor

Selector styles

Vari-Mu, Opto, FET, VCA, Fairchild and Diode Bridge.

Document revision 3 · Updated 5 November 2026

For product version 1.0.0

These styles step, fix or limit their ratio and timing.

Controls by style

StyleDetectorControls
Vari-MuVariable-mu pathAttack offers 25, 50 or 70 ms. Recovery offers 200, 400 or 600 ms, 4 s or 8 s.
OptoOptical cellRelease has two stages: a fast stage of 87 ms, then a slower tail of 0.8 to 15 s that follows how deeply and how long the cell was driven. Attack is 10 ms. Ratio gives Compress at 3:1, or Limit when set to 90:1 or higher. Range runs to 30 dB.
FETFast peakRatio steps through 4:1, 8:1, 12:1, 20:1 and the all-buttons position. Attack runs from 0.02 to 0.8 ms and Release from 50 to 1,100 ms.
VCARMS with a VCA cellAttack speeds up as gain reduction deepens, from 15 ms at 10 dB to 3 ms at 30 dB. Release recovers at 120 dB per second, and Hold is fixed. Ratio gives a limiting law at 100:1.
FairchildCell detectorOne selector sets paired attack and release. The ratio follows the signal level.
Diode BridgePeakRatio steps through 1.5:1, 2:1, 3:1, 4:1 and 6:1. Attack is 3 or 6 ms and Release is 100, 400, 800 or 1,500 ms.

The all-buttons position on FET gives a 16:1 ratio, longer attack and release and stronger saturation.

Fairchild positions

PositionAttackRelease
10.2 ms300 ms
20.2 ms800 ms
30.4 ms2 s
40.8 ms5 s
50.4 ms2 s, moving to a 10 s recovery after 8 s of repeated signal
60.2 ms300 ms, moving to a 10 s recovery after 8 s of repeated signal and 25 s after 20 s

Page updated 2026-10-28