View Neutra Compressor user manual, PDF
Sidechain
Choose what drives the detector.
Document revision 3 · Updated 5 November 2026
For product version 1.0.0

Source
In Settings > Sidechain, choose Audio, MIDI note or MIDI CC. Audio with External input on uses the host sidechain to drive detection while the main input is compressed. Listen auditions the selected sidechain audio at the output. Turn it off to hear the compressed main signal.
Stereo link
For Audio in Single mode, Link and Stereo link apply to styles other than Glue. Link chooses Stereo, Mid, Side, M>S or S>M. M>S uses the larger of the absolute mid signal and half the absolute side signal; S>M uses the larger of the absolute side signal and half the absolute mid signal. Stereo link, from 0 to 100%, blends linked and channel-specific detector levels; it starts at 100%. In Multiband, each band has its own Link in Options.
With Single and Audio selected, Glue follows the loudest filtered channel and applies shared gain reduction.
Multiband detection
Each band’s Options menu chooses Internal, Filtered or External. Internal detects that band’s own audio. Filtered sends it through a band-pass detector filter. External uses the routed sidechain audio through the same filter; turn on External input and route audio to the host’s sidechain bus. Detector Hz sets the filter’s centre frequency, and Detector Q sets its width.
Link chooses the level driving compression. Linked follows the largest channel magnitude, Unlinked follows each channel, Mid follows the centre component and Side the difference component. MS follows whichever of Mid or Side is larger. Stereo link blends each channel’s own detector level with this selection: 0% uses its own level and 100% uses the selected source.
MIDI
With MIDI note, use MIDI channel, Lowest note and Highest note to choose which notes trigger detection. Velocity scales how note velocity changes trigger level. With MIDI CC, choose Controller. Level sets the trigger level for either source. See Sidechain parameters for ranges and defaults.
Page updated 2026-10-29